gsm not found

Hi,
You said dmesg shows it's installed and gsm registered in asterisk? Now can G400P work normally?
If G400P can't work, please reload the driver:
modprobe zaptel
modprobe opvxg4xx
ztcfg –vvvvvv

Dear

the driver is loaded now when i do
lsmod | grep opv
opvxg4xx 21792 8
zaptel 201160 19 opvxg4xx

and dmesg shows

Found an OpenVox G400P: Version 1.0
[ 21.449318] opvxg4xx: slot 0 is Installed
[ 21.449318] opvxg4xx: slot 1 is Empty
[ 21.449318] opvxg4xx: slot 2 is Empty
[ 21.449318] opvxg4xx: slot 3 is Empty
[ 21.449318] opvxg4xx: Powering up all spans...

but when i loginto asterisk
asterisk -vvvgc
im not getting
GSM Span 1 registered to network!

when i do zap show cheannels
i got
pseudo default default
1 from-gsm default
3 from-gsm default
5 from-gsm default
7 from-gsm default

i have configure the extensio like
the sim card number 736029002
and country code 967 and when i dial the sim card number it should call 71200084

extensions.conf
[from-gsm] // call your SIM number will forward to a test number. 71200084

exten=> s, 1, Answer()
exten=> s, n, Dial(dahdi/1/967712000884); // call to china telcom service
exten=> s, n,Hangup()

asterisk log

[Dec 20 17:33:07] NOTICE[2952] chan_ooh323.c: Unable to load config ooh323.conf, OOH323 disabled

any help would be appreciated

i] Last edited by ammar at 2010-12-20 22:39 [/i

Hi, Please show the output of "gsm show span 1"
If possible, would you pleaes give us ssh to check the problem? Please send ssh to my email: This email address is being protected from spambots. You need JavaScript enabled to view it.

i] Last edited by lisa.gao at 2010-12-21 09:24 [/i

*CLI> gsm show span 1
No such command 'gsm show span 1' (type 'help gsm show' for other possible commands)

Hi,
Please give us SSH to check.

could u plz help me why gsm show span 1 not working